China Jingdao Machinery & Electronic Co., Ltd. is one of the sanyo motors manufacturer and sanyo motor dealer in China that has patents on the motors and generators design. There isn't any problem with IP protection laws when you buy our generator, motor, engines, diesel, gearmotors and other power supply and motor-driven items, even in strict regions, such as North America and Europe. Our company has obtained the certifications of ISO9001-2000, GS/TUV, CE, VL, EPA, QHS, SON, CAP and SRS and we have won EPA 2005 Motor Year Certification. We'll print custom logos and sanyo motor product documentation in your language, and provide spare parts for easily worn down components. We also can design and deliver OEM/ODM samples in one month.

Holding Torque: 0.147 N.m (1.30 lb.in). Step Angle: 1.8°. Voltage: 3.15 V. Current/Phase: 1 Amp
Ohm/Phase: 3.15 Ω. Inductance/Phase: 2.8 mH. Flange Size: 42 mm2 (1.65in2). Connection: 6 Lead.
Rotor Inertia: 0.03 kg.m2 (x10^4). Mass: 0.2 Kg. Front Shaft Size: 22mm x 5mm. Rear Shaft Size: 15mm x 5mm. Symptoms It is often prone to failure causing the tape to jam in the machine or the fast forward and rewind operations to perform badly or not at all. Note there is a curious bug in the VTC-5000 micro controller logic which in the event of a tape transport problem causes the video to go into play mode before shutting down. This bug was fixed in the VTC-5150. Fixing If you experience reel drive problems, first replace the idler. If the problem persists, then try reducing the value of the series resistor for a lower value (e.g. 1R2). If this fails to cure the problem, the motor will probably be at fault and needs a replacement.

Holding Torque: 0.37 N.m (3.27 lb.in). Step Angle: 1.8°. Voltage: 3.96 V. Current/Phase: 1.2 Amp.
Ohm/Phase: 3.3 Ω. Inductance/Phase: 3.4 mH. Flange Size: 42 mm2 (1.65in2). Connection: 6 Lead.
Rotor Inertia: 0.074 kg.m2 (x10^4). Mass: 0.37 Kg. SANYO DC Micro Motor Division has developed a micro motor featuring a ceramic air-bearing design. The new SANYO PM Series brushless motor is appropriate for applications that require high speed and quiet operation at high temperatures. The ceramic air bearing design, using air as a “lubricant,” solves the problems encountered with typical oil-lubricated motors, which tend to break down over the life of the motor or during high temperature operation.